Method to access Load Balance + User Server via remotely. IF you have only 1 server .. no need to setup any thing accept port forwarding in adsl modem i.e 8291 in advance section / virtual server or NAT DMZ set (Mikrotik) WAN IP. (192.168.1.2)
Quick Note for Beginners:
Before you start below method you need Need Static IP Address ( WAN )
Before you start below method you need Dynamic IP Updater Script to update your IP Address ( WAN )
Free Dynamic IP updater for Mikrotik
You can use any 1 of them to update your dynamic IP.
Open 1st router (Load Balance)
Goto IP Services
Change Winbox port 8291 -> 8292
Goto IP FIREWALL NAT ( Load Balance )
Set to address ( Next Server Wan IP )
How to check winbox port are open ?
open your browser and type http://ping.eu/port-chk
Abubaker Siddiq Lasania
Virtual IT Support